Can-Am MAVERICK Sport MAX Series, Operator'S Manual

Page: 108 / 187

MAINTENANCE PROCEDURES
tmr2011-010-004_a
TYPICAL
1. Oil filter screw
2. Oil filter cover
3. O-ring
4. Oil filter
Oil Filter Installation
Check and clean the oil filter inlet and
outlet area for dirt and other contami-
nations.
1. Inlet bore from the oil pump to the oil filter
2. Outlet bore to the engine oil providing
system
Install a NEW O-ring on oil filter cover.
Install the filter into the cover.
Apply engine oil on O-ring and grease
on the end of filter.
vmr2006-008-001_a
1. Slightly oil
2. Slightly oil
Install the cover on the engine.
NOTICE
Pay attention to avoid
pinching the O-ring during filter and
cover installation.
Tighten oil filter cover screws to rec-
ommended specification.
TIGHTENING TORQUE
Oil filter cover
screws
10 N•m ± 1 N•m
(89 lbf• in ± 9 lbf• in )
Radiator
Radiator Inspection and Cleaning
Periodically check the radiator area for
cleanliness.
To access radiator, remove front grill by
pulling the bottom and sliding it down-
ward.
219001880-032_a
Inspect radiator and hoses for leaks or
any damage.
106
______________