Can-Am DS 650 X, Operator'S Manual

Page: 97 / 136

PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 400 KM (250 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is
very important and must not be neglected.)
25 H OR 1250 KM (800 mi)
50 H OR 2500 KM (1600 mi)
100 H OR 1 YEAR OR 5000 KM (3100 mi)
200 H OR 2 YEARS OR 10000 KM (6200 mi)
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
TO BE PERFORMED BY
PART/TASK LEGEND
STEERING
Handlebar fasteners (3) I I Dealer
Throttle/housing/cable (3) I I Customer
Steering system (3) (4) I I Dealer
Tie rod ends I I Customer
Wheel nuts/studs (3) I I Customer
Tires pressure and wear (3) EVERY RIDE Customer
Front wheel hub EVERY RIDE Customer
Front wheels alignment I
I
Dealer
(3) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
SUSPENSION
Swing arm I I Customer
Swing arm lubrication EVERY RIDE Customer
A-arms I
I,
L
Customer
Ball joint boots I I Customer
Ball joint (4) I I Dealer
Shock absorbers I Customer
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
BRAKE
Brake fluid (front and rear) (3) I I
R
(6)
Customer
Brake pads (6) I Customer
Brake system (discs, hoses, etc.) (3) I Customer
Brake line fittings (3) I EVERY RIDE Customer
(3) Pre-ride inspection item.
(6) Brake fluid replacement or
any brake system repairs must
be performed by an authorized
Can-Am dealer.
_____________________
95