Can-Am DS 650 X, Operator'S Manual

Page: 68 / 136

To release mechanism: Squeeze
front brake lever. Lever lock should
automatically return to its original po-
sition. Front brake lever should return
to rest position. Always release park-
ing brake before riding.
5) Multi-Function Switch
The multi-function switch is located on
the left side of handlebar.
V02I0WY
1
1. Multi-functions switch
Headlamp Switch
Located on the top of multi-function
switch. Place switch to LO for the
low beam and taillight. Place switch
to HI for the high beam and taillight.
To close headlamp, move the head-
lamp switch to OFF position.
V02I03Y
1
1. Headlamp switch
Engine Stop Switch
Located at the middle of multi-
function switch. The engine will not
run or start if the engine stop switch
is turned to OFF position.
This switch is used to stop engine and
as an emergency control.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
engine stop switch.
V02I03Z
1
1. Engine stop switch
Engine Start Button
Located under engine stop switch. To
start engine:
– Place the engine stop switch to
RUN.
– Select transmission to the NEU-
TRAL position or squeeze the clutch
lever.
– Turn ignition key to ON position.
– Press and hold the engine start but-
ton.
Release immediately after engine is
started.
V02I03O
1
1. Engine start button
66
______________________