Can-Am DS 650 X, Operator'S Manual

Page: 104 / 136

The release lever must locate on the
spline in such a way that dimension A
is obtained. See the following illustra-
tion.
NOTE: If necessary, unscrew the
Allen socket screw and withdraw re-
lease lever. Replace the lever at the
appropriate position then tighten sock-
et screw to 8 N•m (71 lbf•
in ).
V02D03Y
A
A. 68 to 75 mm (2-11/16 to 2-31/32 in)
Adjust cable free play.
V02D04Y
A
A. 3.5 ± 0.5 mm (9/64 ± 1/64 in)
Clutch Cable Lubrication
Remove the cable from the engine.
Remove the cable from the hand lever.
Put the cable luber (P/N 529 035 738)
or an equivalent on the cable.
Insert the needle of the spray can in
the hole.
Spray cable lubricant (P/N 293 600
041) or an equivalent until it exits the
other end of the cable.

WARNING
Always use a silicone-based lu-
bricant. Using another lubricant
(like water-based lubricant) could
cause the clutch lever/cable stick-
ing or stiffness.
102
_____________________