![Can-Am DS 650 X Operator'S Manual Download Page 110](http://html1.mh-extra.com/html/can-am/ds-650-x/ds-650-x_operators-manual_3863610110.webp)
Properly reinstall removed parts in the
reverse order of their removal.
CAUTION:
Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating
life. If glass is touched, clean it
with isopropyl alcohol which will
not leave a film on the bulb.
Tachometer
The bulb in the tachometer is not re-
placeable. If the tachometer bulb is
burnt, replace the tachometer. See an
authorized Can-Am dealer.
Indicator Lamp
Replacement
Removal
Remove the control panel.
Unplug wires on indicator lamp.
Press both taps then pull indicator
lamp out of hole.
V02A0FY
1
1
1. Tabs
Installation
For installation, reverse the removal
procedure.
Beam Aiming Adjustment
Remove the front fascia.
Using a long screwdriver, turn the ad-
justing screw clockwise to lift the in-
side of headlamp and counterclock-
wise to go down it.
V02G1QY
1
2
1. Headlamp
2. Adjusting screw
Adjust beam height to your conve-
nience then reinstall the front fascia.
108
_____________________
Summary of Contents for DS 650 X
