10
Fig. 21
RTV- X 1140
8. Modify position of cotter pin to avoid interference
with track system hub during installation. There
must not be any resistance when track system is
installed on vehicle’s wheel hub. See Fig. 22
Fig. 22
*** IMPORTANT RTV-X 900 | 1100 | 1120 only ***
9. Installation of Track Systems on vehicles with
ALUMINUM WHEELS
using the original wheel
bolts, is problematic due to bolt thread length.
These vehicles must absolutely use the wheel bolts
(
D
) provided in the installation kit.
10.Secure undercarriage to rear hub using the vehicle’s
wheel nuts and the M12 wheel bolts (
D
) provided in
the installation kit. Use bolt circle
Ø110 mm
.
See
CAUTION: If needed, take rubber protector off
of hub.
CAUTION: Follow torque specification indicated by
vehicle manufacturer when tightening wheel nuts.
Fig. 23
RTV- X 900 | 1100 | 1120
*** RTV-X 1140 only ***
11.Secure undercarriage to rear hub using the vehicle’s
wheel nuts. Use bolt circle
Ø110 mm
.
CAUTION: If needed, take rubber protector off
of hub.
CAUTION: Follow torque specification indicated by
vehicle manufacturer when tightening wheel nuts.
AFTER
BEFORE
