11
Fig. 24
RTV- X 1140
12.Attach the stabilizing rod (
2
) to the anchor bracket
(
1
), using the two spacer bushings (
3
), washer (
4
),
and nut (
5
). Torque to 70 N•m [52 lb•ft]. See Fig. 25
CAUTION: Components must be assembled in the
order shown.
Fig. 25
13.Verify that spring assembly bolt (
6
) is tightened to
the recommended torque specification: 75 N•m [55
lb•ft]. Refer to Fig. 26
Fig. 26
STEERING LIMITER INSTALLATION
14.Assemble steering limiter cables
(C2)
, aluminum
disks
(C1)
and
step spacers
(C5)
together as shown
Fig. 27
IMPORTANT
15.Apply grease evenly all around step spacer bushing
(C5)
and in hole of aluminum disk
(C1)
when
assembling these parts together. See Fig. 28
Fig. 28
FRONT
