CAMSO 24D18C, Service Manual, Page: 60 / 106

5 - 30/36D23/22MC Drive Wheel Seal And Bearing Replacement
58
STEP 18
Install the inner seal shoulder (1) on the spindle.
NOTE: The seal shoulder (1) can be heated to
200°C (392°F) for 20 minutes to be installed by hand.
Be sure the O-ring is in the shoulder groove before
proceeding.
WARNING: Use protective gloves when handling the
seal shoulder.
cp0521
1
STEP 19
The seal shoulder must be completely seated on the
spindle.
With a press use the 2P-0103 Bushing (1) and 2P-
0095 Spacer Plate (2) to press the seal shoulder
completely on the spindle.
Without a press use the 2P-0095 Mounting Plate (3)
2P-0103 Bushing (4), 2P-0082 Spacer (5), the
spindle locknut (6) and 2P-0083 Spindle Locknut
Socket to tighten the spindle locknut (6) to completely
seat the seal shoulder on the spindle.
cp1736
2
1
NOTE: The bolts provided with the 2P-0082 spacer
(5) can be used to assist in removing the spacer (5).
cp0546
5
4
3
6