CAMSO 24D18C, Service Manual, Page: 59 / 106

5 - 30/36D23/22MC Drive Wheel Seal And Bearing Replacement
57
STEP 15
Remove the inner bearing cone (1) and the seal (2)
from the spindle.
NOTE: The bearing cone is press fit and on older
models use a bearing splitter / puller to remove the
bearing or cut the bearing off the spindle. Both
methods can damage the seal shoulder and it must
be replaced. On newer models remove the three
plugs (3) and install the three M14 pusher bolts,
included with the 2P-0080 Spindle Extraction Tool.
Use the pusher bolts to remove the bearing (1) and
seal shoulder.
STEP 16
On older models, use a bearing splitter and puller to
remove the inner seal shoulder (1).
STEP 17
Remove the O-ring (1) from the inner seal shoulder.
Install a new O-r ing on the new 2C-3299-100
shoulder O-ring grove before installing the shoulder
in Step 18.
NOTE: Apply clear petroleum jelly to the O-ring (1)
to hold it in place during assembly.
cp1021
1 3
2
1
cp1714
3
cp0521
1
cp0524
1