www.camplux.com
26
NOTICE:
The hot and cold pipes should be insulated as shown help to provide additional freeze protection.
DURING INSTALLATION OF THIS WATER HEATER
MUST DO
• DO check inlet gas pressure to ensure that it is within the range specified on the rating plate.
• DO provide adequate air for combustion and ventilation as discussed in the Use & Care Manual and the
National Gas Code (CAN/CGA B 149 in Canada).
• DO maintain proper clearances to combustibles as specified by applicable code.
• DO ensure that the flue terminal location complies with the guidelines found in the Use & Care Manual and
National Fuel Gas Code (CAN/CGA B 149 in Canada).
DO NOT
• DON’T block or restrict Air Intake Opening located on the back side of the water heater.
• DON’T remove the front cover unless absolutely necessary. This should only be done after being examined by
a qualified service technician.
• DON’T install this product where standing water may occur.
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
