www.camplux.com
23
3. Replace the front cover on the remote control.
WARNING:
Field wiring connections and electri cal grounding must comply with local codes, or in the
absence of local codes, with the la test edition of the National Electrical Code,ANSI/NFPA 70, or in Canada,
Canadi an Electrical Code, CSA C22.1Part1.
ELECTRICAL CONNECTION
POWER CORD
• The electric power supply requirement for this water heater is 120 VAC/60HZ, 2 Amps.
• The water heater comes with a three (3) pin power supply cord. Use only a power outlet with a ground
terminal.
• The installation of an electric leakage breaker is recommended. (GFCI)
• Keep any excess of the power supply cord on the outside of the water heater.
• If local codes require hardwiring, see instructions for “Hardwiring the Electrical Connections”.
WARNING
: Shock hazard line voltage is present. Before servicing the water heater, turn off the electrical
power to the water heater at the main disconnect or circuit breaker. Failure to do so could result in severe
personal injury or death.
Rubber Screw
Base of Control
Wood Thread Screw
Wall
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
