Ground Wire
Power Cord
Ground Wire
Heat Exchanger Protection Device
Gas Proportion Valve(A)
Gas Main Valve(B)
Anti-Freezer
for Certain
Models
Section
Valve
Section
Valve C
Temp. Sensor
of Water Outlet
Temp. Sensor
of Water Intlet
Panel Display
Ignition Needle
Ignition Needle
Feebdack Wire
Feebdack Wire
Water Flow Sensor
Water Valve
Remote Control
(Optional)
www.camplux.com
24
HARDWIRING THE ELECTRICAL
CONNECTIONS
• Wiring should be carried out by a qualified electrician in accordance with local codes.
• The water heater requires 120 VAC/60Hz and should be properly grounded.
• DO NOT connect grounding wire to water pipes, gas pipes, telephone cables, lightning conductor circuits and
to grounding circuit of other equipment that carry a ground-fault interrupter.
• An ON/OFF switch must be provided and installed for the incoming 120VAC power.
• Wire the water heater exactly as shown below. A wiring diagram is also found inside of the cover panel.
• A green screw is provided in the junction box for grounding connection.
• Connect the live wire to black leg wire and the neutral wire to the white neutral wire.
CAUTION:
Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation. Verify correct operation after servicing.
ELECTRIC WIRING DIAGRAM
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
