![background image](http://html1.mh-extra.com/html/campbell/skyvue-8m/skyvue-8m_product-manual_489150045.webp)
Table 5-1: Summary of the terminal mode commands available
Command
Parameter/
parameter block
Description
parameters, tilt angle, units, temperature/humidity,
temperatures, supply voltages, height offset, visibility
cap, laser run days, window parameters, backscatter
parameters, features, alarms, warnings, and status.
Note: Refer to
(p. 46) for more
information on this command
TERMINAL
Terminal
Timeout
Sets the user terminal time out.
Timeout is the delay in minutes from 1 to 15 where the
terminal will automatically close if no characters are
sent to the SkyVUE 8M. The default is 10 minutes.
TIME
Date_Time
Date is in the format yyyy/mm/dd
Time is in the format hh:mm:ss
yyyy=year, mm=month, dd=day
hh=hours, mm=minutes, ss=seconds
For example: time 2013/05/25 10:00:00, sets the date
and time to May 25, 2013 at 10:00:00)
Note: The set time could drift by up to ±14 seconds
a day.
UNITS
Units
Sets measurement units and tilt correction
Units = 0, meters corrected by tilt
Units = 1, meters not corrected by tilt
Units = 2, feet corrected by tilt (default)
Units = 3, feet not corrected by tilt
SkyVUE™8M Tactical LIDAR Ceilometer
40