![background image](http://html1.mh-extra.com/html/campbell/skyvue-8m/skyvue-8m_product-manual_489150030.webp)
5.1.9 Loading a new operating system (OS)
5.1.10 Stratocumulus backscatter calibration
5.1.11 CRC-16 codes on terminal commands
5.1.1 Entering/exiting the SkyVUE 8M terminal mode
Use the
OPEN Sensor_ID Password
command to enter the menu system. The menu will
time out and close automatically if not used for ten minutes.
Sensor_ID
is the SkyVUE 8M identification, a single character 0-9, a-f, A-F case sensitive.
Default is 0. Enter the password if using one. The following text should be displayed:
. The SkyVUE 8M is now ready for terminal mode commands.
The SkyVUE 8M commands are not case sensitive, but the parameters and password are case
sensitive.
Example of the open command followed by the
0
parameter:
OPEN 0
Example of the open command with the password
Secret
:
OPEN 0 Secret
5.1.2 Terminal mode commands general
(p. 27) provides a summary of the terminal mode commands.
To send commands that setup and control the SkyVUE 8M, use the terminal interface, data
logger, or terminal emulators built into many Campbell Scientific software products.
NOTE:
To load an operating system (OS), you need a terminal emulator with XMODEM protocol
such as Tera Term.
SkyVUE™8M Tactical LIDAR Ceilometer
25