website. Under Device Type, select Network Peripheral > NL241. Click Install USB Driver and
follow the prompts.
1. Apply power to the NL241.
2. Connect the supplied USB cable between a USB port on your computer and the USB port
on the NL241.
3. Open
Device Configuration Utility
.
4. Under Device Type, select Network Peripheral > NL241.
5. Click Browse
next to Communication Port.
6. Select the port labeled NL241.
7. Click OK.
8. Click Connect.
9. Configure the NL241 as needed for your application.
10. Click Apply to save the changes.
7.2 Configuring the NL241 with
Device
Configuration Utility
via Wi-Fi WLAN
NOTE:
The NL241 is configured by default to host an open Wi-Fi network and have an IP address of
192.168.67.1. The network name will follow the pattern “NL241_
SerialNumber
.”
1. Apply power to the NL241.
2. The NL241 will power up and either create or join a Wi-Fi network. After successfully
joining or creating a network, the LED will flash with network activity. Note that the LED
may only flash once every few seconds on the created network or an idle network.
3. If the device is configured to create a network, the computer must join the NL241-created
network. If the NL241 has been previously configured to join a network, join the same
network with your computer.
4. Open
Device Configuration Utility
.
5. Under Device Type, select Network Peripheral > NL241.
6. Select Use IP Connection.
NL241 Wireless Network Link Interface
21
