7. The data logger should be discovered automatically. Select the data logger, and all
necessary fields in the Logger Setup screen will be filled in automatically. To enter the
information by hand, manually type the IP address of the NL241 in the Address field under
TCP Settings. Leave the Port at 6785. Select the data logger Type. Type the PakBus address
of the data logger (default is 1) in the Address field under PakBus Settings. Type the NL241
PakBus address (default is 678) in the Neighbor field. The following screen shows the
correct information filled in for a CR1000 with PakBus address of 2.
8. Type a name for your data logger in the Name field. If your data logger has a Security
Code, TCP Password, or Encryption Key, type those in the corresponding field.
9. Click SAVE to save the changes.
3.4 Connect
You are now ready to connect to your data logger using
LoggerLink
. Select the data logger from
the
LoggerLink
home screen and
LoggerLink
will connect to the data logger. From there, you can
view and collect data, or manage data logger settings.
NL241 Wireless Network Link Interface
8
