Campbell NL200, Instruction Manual

Page: 35 / 61

NL200/201 Network Link Interface
24
FIGURE 8-1. Working around firewalls
8.1.1 Configuring the NL200/201
x
Connect to the NL200/201 in
DevConfig
(see Section 6 ,
Configuring the
NL200/201
(p. 10)
).
x
On the NL200 tab:
o
Set Bridge Mode to disable .
o
Set Use DHCP to disable .
o
Input the IP Address , Network Mask , and Default Gateway . These
values can be provided by your network administrator.
x
On the Network Services tab:
o
Make note of the PakBus/TCP Server Port .
8.1.2 Configuring the Datalogger
The datalogger must first be configured for internet
communication (i.e., through an NL115, an NL120, a second
NL200/201, or a cellular modem).
x
Connect a serial cable from the PC COM port to the datalogger’s RS-232
port.
x
Open
DevConfig
. Select the device type of the datalogger (CR800,
CR1000, or CR3000), the appropriate Communication Port , and Baud
Rate . Press Connect to connect to the datalogger.
x
On the Network Services tab:
o
Under PakBus TCP Client Connections , input the NL200/201’s IP
address and PakBus TCP Server Port .
x
Press Apply to save the changes and then close
DevConfig
.
NOTE
LoggerNet
Firewall
Firewall
Firewall
Cellular Network
Internet / WAN