Campbell NL200, Instruction Manual

Page: 20 / 61

NL200/201 Network Link Interface
9
Power Input
NL201: CS I/O or barrel connector jack; not powered over USB
NL200: Barrel connector jack; not powered over CS I/O or USB
Power Requirements
7 to 20 Vdc
50 mA active, 2 mA standby @ 13 Vdc
Standby power is when the IPNetPower instruction has been used
to turn off power to the Ethernet. See the CRBasic help for an
example of using the IPNetPower instruction. Note that the
IPNetPower instruction is only applicable when the NL200/201 is
configured with Bridge Mode Enabled.
Operating Temperature
Standard: –25 to +50
q
C
Extended: –55 to +85
q
C
Configuration
DevConfig
over USB or Ethernet
Telnet console over Ethernet
Terminal menu over RS-232
CS I/O Port
SDC 7, 8, 10, 11 (does not support ME)
9600 bps to 460.8 kbps
RS-232 Port
DTE
1200 bps to 115.2 kbps
Ethernet
10Base-T (full and half duplex), 100Base-TX (full and half duplex),
Auto-MDIX
Auto-IP (APIPA), IPv4, IPv6, ICMP/Ping, ICMPv6/Ping, TCP, DHCP
Client, SLAAC, DNS Client, HTTPS Proxy, Telnet Server, TLS,
PakBus®, Modbus TCP/IP
Miscellaneous
Supports 20 simultaneous TCP connections
Up to 10 of the 20 TCP connections can be used for TLS
PakBus® router supports 50 routes
Supports up to 15 concurrent Modbus server transactions
Compliance
RoHS Compliant
The NL200/NL201 is encased in metal and meets requirements for a Class
B device under European standards:
APPLICATION OF COUNCIL DIRECTIVE(S)
2004/108/EC
STANDARD(S) TO WHICH CONFORMITY IS DECLARED:
EN61326-1;2013
NOTE