9.12 File system error codes
Errors can occur when attempting to access files on any of the available drives. All occurrences
are rare, but they are most likely to occur when using optional memory cards. Often, formatting
the drive will resolve the error. The errors display in the File Control messages box or in the
CardStatus field of the Status table. See
Information tables and settings (advanced)
(p. 163) for
more information.
1 Invalid format
2 Device capabilities error
3 Unable to allocate memory for file operation
4 Max number of available files exceeded
5 No file entry exists in directory
6 Disk change occurred
7 Part of the path (subdirectory) was not found
8 File at EOF
9 Bad cluster encountered
10 No file buffer available
11 Filename too long or has bad chars
12 File in path is not a directory
13 Access permission, opening DIR or LABEL as file, or trying to open file as DIR or mkdir existing
file
14 Opening read-only file for write
15 Disk full (can't allocate new cluster)
16 Root directory is full
17 Bad file ptr (pointer) or device not initialized
18 Device does not support this operation
19 Bad function argument supplied
20 Seek out-of-file bounds
21 Trying to mkdir an existing dir
22 Bad partition sector signature
23 Unexpected system ID byte in partition entry
24 Path already open
25 Access to uninitialized ram drive
26 Attempted rename across devices
27 Subdirectory is not empty
31 Attempted write to Write Protected disk
32 No response from drive (Door possibly open)
33 Address mark or sector not found
34 Bad sector encountered
9. Tips and troubleshooting
161