10.4.36 Neighbors
This setting specifies, for a given port, the explicit list of PakBus node addresses that the data
logger will accept as neighbors. If the list is empty (the default value) any node will be accepted
as a neighbor. This setting will not affect the acceptance of a neighbor if that neighbor's address
is greater than 3999.
l
String data type
10.4.37 NTPServer
This setting specifies an NTP Server to be queried (once per day) to adjust the data logger clock.
This setting uses the UTC Offset setting. If UTC Offset setting is not set, it is assumed to be 0.
l
String data type
10.4.38 PakBusAddress
This setting specifies the PakBus address for this device. Valid values are in the range 1 to 4094.
The value for this setting must be chosen such that the address of the device will be unique in
the scope of the data logger network. Duplication of PakBus addresses can lead to failures and
unpredictable behavior in the PakBus network.
When a device has an allowed neighbor list for a port, any device that has an address greater
than or equal to 4000 will be allowed to connect to that device regardless of the allowed
neighbor list.
10.4.39 PakBusEncryptionKey
This setting specifies text that will be used to generate the key for encrypting PakBus messages
sent or received by this data logger. If this value is specified as an empty string, the data logger
will not use PakBus encryption. If this value is specified as a non-empty string, however, the data
logger will not respond to any PakBus message unless that message has been encrypted.
l
String data type
10.4.40 PakBusNodes
Discontinued; aliased to CommsMemAlloc
10. Information tables and settings (advanced)
182
