Campbell CC5MPXWD, Instruction Manual

Page: 84 / 126

CC5MPX Digital Camera
72
TABLE 8-13. PakBus Communication Settings
Variable
Allowable
Values Description
RS-232 BAUD Rate
• 115200
• 57600
• 38400
• 19200
• 9600
Select the desired baud rate. Once the baud rate is set, it will always
be fixed. The factory Default Settings is 115200 baud.
RS-485 BAUD Rate
• 115200
• 57600
• 38400
• 19200
• 9600
Select the desired BAUD rate. Once the baud rate is set, it will
always be fixed. The factory Default Settings is 115200 baud.
PakBus Port Read Only
This read only value reflects the internal jumper settings of the
camera. It will either read RS-232 or RS-485. See Section 8.5 ,
Internal Jumpers
(p. 76)
, if the jumpers need to be changed. This value
cannot be changed in this view.
PakBus Address 1 to 4094
The desired PakBus address for this camera. The factory default is
55.
PakBus Destination
Address
1 to 4094
The PakBus address of the device the camera will communicate with
or send files to.
PakBus Neighbour
Address
0 to 4094
Enter the address of the PakBus device physically to connect to the
CC5MPX PakBus communication lines. This allows the neighbour to
relay communication between the CC5MPX and the final destination
for the data.
PakBus
Communication
Delay
0 to 16
Extra delays may be required for certain communication links, such
as satellite.
PakBus Security
Code
0 to 65535
The factory default is 0. If a security code is not required by the
PakBus destination device, set this parameter to 0. Otherwise set the
security code as required by the destination service.
8.4.8 Still Image Settings
Selecting the Still Image Settings page tab brings up the Still Image Settings
page (see FIGURE 8-38 ). The Still Image settings allows for the configuration
of still images that the camera will take.
There are two sub tabs that include two independent Still Settings:
•
Still Settings #1
•
Still Settings #2
TABLE 8-14 describes the variables used in the
Still Image Settings
.