Campbell CC5MPXWD, Instruction Manual

Page: 113 / 126

CC5MPX Digital Camera
101
washers included with protective cover chains of the bottom cap and the RJ45
cap.
After the screws are removed, gently pull the backplate out. The backplate will
still be attached to the camera with the wires. Do no remove the wires. Pivot
the backplate to the left side of the camera. The inside of the camera is now
accessible.
When replacing the backplate, ensure that the O-ring is still seated properly on
the backplate (see FIGURE 9-1 , Backplate O-ring
(p. 98)
). This is very important
as the O-ring is required to properly seal the camera.
The backplate can only be seated in the orientation that aligns the flat surfaces
of the backplate and the bottom of the camera body. This will also help align
the screw holes. The six screws can now be threaded and hand tightened. Be
sure the two plastic washers are located between the tether chains and the
backplate.
FIGURE 9-5. Backplate View
10. Miscellaneous Notes
10.1 Internal USB Function
The internal USB port in the camera currently only has one function. It
provides a backdoor for setting up the network interface on the camera. When
first connected to a PC the following window will appear: