Campbell CC5MPXWD, Instruction Manual

Page: 31 / 126

CC5MPX Digital Camera
19
A standard CAT5 (or better) Ethernet cable with RJ45 connectors (pn 28900)
can be used to interface to the camera in indoor conditions or for temporary
connection outdoors when conditions permit. When an Ethernet connection is
required for permanent outdoor installations or when a connection to the
camera is required in wet or harsh conditions, the Environmental Ethernet
Cable assembly (pn CC5MPXCBL2-L) needs to be used.
The Environmental Ethernet Cable assembly provides one end with an
environmental connector that provides a weatherproof connection when
properly mated to the camera. The other end of the cable consists of a standard
RJ45 connector. The Environmental Ethernet Cable is meant to provide an
Ethernet connection between the CC5MPX and a network router, a cellular
modem, or a laptop.
Details of the Environmental Ethernet Cable are as follows:
•
CAT5E shielded cable with polyurethane jacket.
• IP67 environmentally rated RJ45 connector on one end and a regular
RJ45 connector on the second end.
•
Maximum recommended cable length 70 m (230 ft).
8.2 Camera Hardware Description
FIGURE 8-2. CC5MPX Connector Layout
8.2.1 Ethernet RJ45 Connection
The RJ45 connector on the camera, shown in FIGURE 8-2 , is meant to
interface the CC5MPX with either a network router, a cellular modem, or
directly to a laptop.
If a permanent Ethernet connection is not required for an outdoor environment,
then the protective cap must be securely attached to the Ethernet connector to
provide an environmental seal.