Campbell CC5MPXWD, Instruction Manual

Page: 70 / 126

CC5MPX Digital Camera
58
The Capture Interval is the time between capture events once the Start Minutes
value is reached. For hourly pictures, a value of 60 can be entered. If a value of
0 is entered (not recommended), the Image Interval time will apply to still
images and video of the specified duration will be captured repeatedly.
TABLE 8-10 summarizes all the parameters associated with the Self Timed
Capture.
TABLE 8-10. Self Time Capture Variables
Variable Allowable Values Description
Self Timed
Capture
• Enable
• Disable
Enables or Disables the Self Timed Capture Trigger.
Start Minutes 0 to 1439 Start time in minutes relative to midnight.
Stop Minutes 0 to 1439 Stop time in minutes relative to midnight.
Capture
Interval
0 to 1439
Interval between capture times in minutes. To initiate a
capture interval every 5 min set the variable to 5.
Still Image
Capture
• YES
• NO
Select YES to include still image captures.
Number of
Images
1 to 60
Determines how many still images will be taken when the
capture time is reached.
Image Interval 1 to 60
If the number of images (above parameter) is greater than 1,
this parameter is the time spacing between images.
Capture to
Memory Card
• CARD
• NO
Selecting CARD enables the still images taken to be stored to
the memory card.
Maximum
Memory Size
0 to 65535
This is the allowable space on the memory card that will be
reserved for Still Images taken by the Self Timed Capture (in
megabytes). A value of 1000 will reserve 1000 MB. A value
of 0 has the camera automatically allocate memory.
Management
Type Options
• Fill and Stop
• Ring Memory
There are 2 methods of managing files on the memory card:
• Fill and Stop will stop recording additional images once the
memory card is full or the allocated memory size is
reached.
• Ring memory management will start deleting the oldest files
once the memory card is full or the allocated memory size
is reached.
Still Image
• Setting #1
• Setting #2
Still images for this Self Timed Capture can use 1 of 2
settings. Settings #1 and #2 can be setup with various banner,
resolution and compression values. Refer to Section 8.4.8 ,
Still
(p. 72)
.
Main Folder
Name
Read Only Field
This is a read only field. The name of the main folder where
the still image files will be stored (SelfTimed1Still).