Campbell BaroVUE 10, Product Manual

Page: 3 / 48

8.7.2 Recovery mode 27
9. Troubleshooting and maintenance 29
9.1 Troubleshooting 29
9.2 Maintenance 29
9.3 Sensor card replacement procedure 30
Appendix A. Importing Short Cut code into CRBasic Editor 33
Appendix B. SDI-12 sensor support 34
B.1 SDI-12 command basics 34
B.1.1 Acknowledge active command (a!) 35
B.1.2 Send identification command (al!) 35
B.1.3 Start verification command (aV!) 36
B.1.4 Address query command (?!) 36
B.1.5 Change address command (aAb!) 36
B.1.6 Start measurement commands (aM!) 37
B.1.7 Start measurement commands with cyclic redundancy check (aMC! and aCC!) 37
B.1.8 Stopping a measurement command 38
B.1.9 Send data command (aD0! … aD9!) 38
B.2 SDI-12 transparent mode 38
B.2.1 Changing an SDI-12 address 39
B.3 References 41
Table of Contents - ii