FIGURE 7-2. Zero wind pressure plate
Mount the sensor with the pneumatic connector pointing vertically downwards to prevent
condensation collecting in the pressure cavity, and also to ensure that water cannot enter the
sensor.
7.3.2 Typical mounting
CAUTION:
To prevent condensation, install the sensor in an environmentally protected enclosure,
complete with desiccant. Change desiccant at regular intervals.
The BaroVUE 10 is typically mounted in a Campbell Scientific enclosure next to the data logger.
Secure the BaroVUE 10 to an enclosure backplate by inserting screws through the mounting
holes in the BaroVUE 10 and into the grommets.
BaroVUE™10 Digital Barometer
12
