Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
For parts, product & service information
visit
www.campbellhausfeld.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
IN700601AV 4/13
See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
CHN104
Campbell Hausfeld Nailers meet or exceed Industries’
Standards as set forth by the American National
Standard Institute/International Staple, Nail and Tool
Association in ANSI/ISANTA SNT-101-2002.
© 2013 Campbell Hausfeld/Scott Fetzer
RegisteR youR pRoduct online now! http://www.chpower.net/reg
2-in-1 Nailer/Stapler
Table of Contents
General Safety . . . . . . . . . . . . . . . . . . . .1
Specifications . . . . . . . . . . . . . . . . . . . . .2
Operating The Tool . . . . . . . . . . . . . . . .3
Troubleshooting . . . . . . . . . . . . . . . . . .7
Warranty . . . . . . . . . . . . . . . . . . . . . . . .8
Description
This tool is designed for decorative trim,
molding, window casings, furniture
trim, picture frame assembly, cabinetry,,
and crafts . Features include: convenient
top loading magazine which holds
up to 100 brads or staples, adjustable
depth control, adjustable exhaust, quick
clear nose .
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit . Make sure
to tighten fittings, bolts, etc ., before
putting unit into service .
ReaD & Follow all INSTRUCTIoNS
Save TheSe INSTRUCTIoNS
Do NoT DISCaRD
Safety Guidelines
This manual contains information
that is very important to know and
understand . This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS . To help
recognize this information, observe the
following symbols .
Model ChN104
This manual contains safety, operational
and maintenance information . Contact
your Campbell Hausfeld representative
if you have any questions .
opeRaToR’S ReSpoNSIbIlITy:
The tool operator is responsible for:
• Reading and understanding tool
labels and manual .
• Selecting an appropriate tool
actuation system, taking into
consideration the work application
for which the tool is used .
• The safe use of the tool.
• Ensuring that the tool
is used only when
the operator and all
other personnel in the
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NoTe:
Information that requires special
attention .
General Safety Information
CalIFoRNIa pRopoSITIoN 65
This product or
its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can
create
dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
Locate model and date code on tool
magazine and under nozzle shield,
and record below:
Model No . ________________________
Date Code ________________________
Retain these numbers for future
reference .
