CAMPAGNOLO ErgoBrain, Operation Manual

Page: 25 / 100

ENGLISH
UK
- 7
8. Set chainring's shift timing.
Danger!
This operation must be performed as you are riding the bicycle.
Therefore, in order to minimize the potential of an accident,
this operation must be performed in a wide, open space which
is free from traffic or other obstacles.
Note: If this is not a “first time” setting, and if you have not changed the
chainrings or adjusted the tension of the front derailleur cable
since last time, you can skip this procedure. To skip this, just
push S/S button. This completes all the setting and the screen
moves to measuring mode.
Install the main unit onto your bicycle and ride it.
First, shift into the inner chainring and the fifth sprocket.
Important: In this procedure, Ergopower shifting should be done
slowly and steadily. S/S button should be pushed when
the chain has securely shifted to the next chainring.
Shift from the inner chainring to the middle. Push S/S button. Shift from
the middle to the outer. Push S/S button again. Repeat this operation
with the shifting down from outer - middle - inner. When shift timing
setting is completed, the screen moves to the measuring screen.
Note: If "Error" display appears on the screen, the main unit is not in-
stalled firmly onto the bracket, or there may be a problem with
the sensor of the Ergopower lever.
Start with
the inner chainring
and the fifth sprocket.
Continue shifting and
push S/S button
each time.
8123 8 85.4977866.2831847.0685820.7853988
F-1/R-5
F2 - 3 - 2 - 1
To measuring screen
Shift chainring
Memorize timing
at each shift
S/S
S/S
Important:
In this page, the operation of S/S but-
ton should be done with the lever’s
button.