CAMPAGNOLO ErgoBrain, Operation Manual

Page: 24 / 100

ENGLISH
UK
- 6
6. Input chainring's number of teeth. Start with inner chainring.
Push MODE button to increase the digits, and S/S button to decrease.
Push SET button to fix, then the screen moves to the next chainring.
To return to the former chainring, push S/S and MODE button simulta-
neously.
When chainring's setting is completed, the screen moves to the sprock-
et's setting.
Note: If you have selected CDC sensor [ON], the next sprocket setting
is not required; please move to process 8.
7. Input sprocket's (cog set's) number of teeth.
Select the number of teeth from the seven combinations of the cog set.
If your sprockets' combination is not included in these cog sets combi-
nation, select [FREE] and you can input all the sprockets manually.
Note: Sprocket setting should be done individually for wheel A and wheel
B. First, input wheel A's sprocket, and hold down SET button.
The screen moves to wheel B's sprocket setting. Repeat the same
procedure for wheel B.
Lowest gear R9
6 7
COG 11-21
COG 11-23
COG 12-21
COG 12-23
COG 13-23
COG 13-26
COG 13-28
F R E E
Top gear R1
Increases the
number of teeth
Inner chainring
F1
Middle chainring
F2
Outer chainring
F3
Decreases the
number of teeth
Button operation
Back to
previous gear
To the next step
In case of FREE, input
the number of teeth
manually.
Goes to next gear
Switch between
combinations
Input chainring's
number of teeth
If CDC sensor is OFF
If CDC sensor is ON
Change
Input sprocket's
(cog set's)
number of teeth
SET
SET
SET
SET
SET
SET
SET
SET
2sec.
MODE
MODE
MODE S/S
S/S
SET
Select from 7 types
of combinations