CAMPAGNOLA Mastiff, Use And Maintenance Manual

Page: 43 / 120

3 -SPECIFICATIONS
43 - 120
WARNING!
•
Any other use has to be considered improper and potentially dangerous for the operators’ safety. This
would make any warranty claims void.
•
If it is not used for the purposes it was designed for, the shear may cause serious injuries to personnel
and bystanders and damages to equipment and things
3.5 Parts
Pos. Description Function Pict. No
1 Battery set Operates the shear A
2 Braces buckles Fasten the braces to the shoulders A
3 Belt buckles Fasten the backpack A
4 Battery backpack Allows to carry the battery set A
5
Electronic system connector Connects the electronic card to the battery set
A
6 Cable loops
Allow to fasten the cables to the backpack
A
7 Battery charger plug Connects the charger to the battery set A
8 ON-OFF switch Operates the electronic card A
9 Braces Hold 10% of the backpack weight A-F
10 Power supply cable
Connects the shear to the electronic card box
B
11 F
ront cover fixing screws Fasten the cover for the blades replacement
B
12 Trigger Operates the shear B
13 ON–OFF led light Indicates if the shear is on or off B
14 Cutting blade Mobile blade
B-E
15 Blade group Cutting parts B
16 Anvil Fixed blade B-E
17 Trigger guard
Protects the trigger from accidental operating
B
18 Electronic card box
Contains the electronic card for operating the shear
C
19 Selector Allows to select the shear operating mode C
20 Display
Shows the necessary information to operate the shear
C
21
Electronic card power supply cable Connects the electronic card to the battery set
C
22 Locking nut Locks the blades pin D
23 Nut washer Distributes the nut pressure
D
24 Front cover fixing nuts Lock the blade replacement cover
D
25 Blade bushing Drives the cutting blade D
26 Rack pin Connects the cutting blade to the rack
D
27 Rack seeger ring Holds the rack pin
D
28 Pin spacer Facilitates removing the rack seeger ring D
29 Blade pin Is the fulcrum of the cutting blade and the anvil D
30 Front cover Allows to replace the blades
D
31 Rack pin cover Allows to re-assemble the rack pin D
32 Cutting blade washer Improves the friction between cutting blade and shear D
33 Anvil fixing screw Locks the anvil
D
34 Arm cable-fastener
Keeps the cable close to the operator’s arms, so that he can move freely
E
35 Holster Protects the shear during the transport E
3.6 Technical details
•
Shear weight
: ............................................................................ 1040 gr
• Weight of battery, electronic card box and backpack : ....................... 3,8 kg
•
Blade opening
: .......................................................................... 40 mm
•
Battery
: .................................................................................... Li-FePo4
• Battery endurance : .................................................................... >10 ore
• Automatic electronic battery charger model …………………......…… 0136.0125 ( max. recharging time: 5 hours )
3.7 Safety devices
•
Built-in safety device: When not working, after 1 minute the trigger has to be pressed 3 times to re-start the
shear; after 5 minutes the electronic card has to be switched off and then on by means of the selector (19) to re-
start the shear; after 20 minutes the battery automatically disconnects from the power supply, so it has to be
started again by means of the switch (8).