CAMPAGNOLA Mastiff, Use And Maintenance Manual

Page: 40 / 120

40 - 120
•
Parts with manufacturing defects will be repaired or replaced free of charge.
•
Labour and transport costs are excluded from the warranty.
•
All the parts subject to wear (belts, filters, blades, seals, etc.) are excluded from the warranty.
•
Costs of interventions performed by the manufacturer’s personnel (inspections, disassembling and assembling
operations) caused by a wrong use of the product are not included in the warranty.
•
The manufacturer’s Technical Service personnel will indicate which replacements and/or repairs will be carried
out under warranty, and their decision is final.
•
The Company shall not be held responsible for any injury or damage caused to people, animals or objects, due
to improper use or maintenance of the products. The warranty is limited to the manufacture defects.
•
The warranty becomes void in case of tampering and/or even small changes carried out without the
manufacturer’s Technical Staff permission and in case of use of non-original spare parts.
•
In any case the replacement of the product is not included in the warranty.
WARNING!
For warranty claims, according to the above-mentioned points, it is necessary to enclose the warranty
card properly filled-in and the corresponding document with the date of purchase (invoice or any other
official document).
2 - SAFETY PRECAUTIONS
2.1 Precautions
Warning!
Campagnola S.r.l. declines all responsibilities if the precautions below are not taken.
2.1.1 Results of the tests made according to the Laws
Warning!
Risks due to the operator’s contact with the noise and vibrations of the machine or tool.
1)
Noise level
Continuous A-weighted sound pressure level at the operator’s ear (LpA) and sound power level of
the tool (LwA), both calculated according to the UNI EN ISO 3746 rules
2)
Vibrations level
Average weighted hand-transmitted vibration value, in frequency, the user is exposed to,
measured in compliance with EN ISO 5349
Warning!
The compliance with the working environment safety and health regulations indicated by the current
laws (2003/10/EC Directive, 2002/44/EC Directive and 81/2008 Law Decrete) have to be carried out either
by the employer or by the end-user: supplying the adequate individual protecting devices, informing
about the safety risks, performing sanitary survey, etc…
3)
ELECTROMAGNETIC COMPATIBILITY LEVEL
The tool complies with the 2004/108/CE electromagnetic compatibility Directive.
2.1.2 General precautions
WARNING!