Operation and maintenance instructions
Series PRE proportional pressure regulator
IO-Link version
5000030186
Ver. 03
23
For more details and for the complete list of errors and warnings, refer to the paragraph
"Troubleshooting and/or exceptional circumstances ".
COMMANDS
In this section it is possible to send a new command to the device or to check the history of the
commands sent.
If the device is in the Automatic operating mode, the only command that can be sent is "Start
manual mode" which allows the activation of the Manual operating status.
If the Manual operating mode is activated on the device, it is possible to send the following
commands:
•
End manual mode: which allows to activate the Automatic operating mode.
•
Set Pressure: the target pressure is set via this command.
11.4.
Configurator
By clicking on the button below the image of the device (
) it is possible to
open the configurator. It is not possible to modify the parameters present in the configurator:
with the IO-Link version, parameters can be modified only through the IO-Link master.
The parameters are divided into groups and can only be modified by the user with the necessary
permissions, furthermore, based on the version of the regulator, only some parameters will be
visible.
