Operation and maintenance instructions
CPU PROFINET Series CX06 module
5000004825
Versione 01
51
You can also change the name of the node within the
CX-Configurator
configuration
software. For more details on using the configurator and in particular of this feature, refer
to the manual "
Operating and Maintenance Instructions - CX Configurator
".
Esistono alcune regole per l’assegnazione del nome del nodo:
o
Length from 1 to 16 characters
o
The characters allowed in the labels are only alphanumeric: [a-z; 0-9, “-“]
o
Labels can not begin or end with the character “-“
o
Example: “dev1-machine1”
Before starting up the configuration software
CX-Configurator
, connect the module to the
PC using a standard USB cable (is available the accessory G11W-G12W-2), then connect the
electrical power supply via connector M12. The CPU module is fitted with a Micro USB
connector under the transparent panel. To access the connector, remove the transparent
panel by loosening the screw securing it to the cover of the module. After completing all
