Camozzi CX06 Series, Operation And Maintenance Instruction

Page: 7 / 27

Operation and maintenance instructions
CPU PROFINET Series CX06 module
5000004825
Versione 01
35
7. Installation and start-up

During unpacking, take great care not to damage the product.

Check whether there are any fault caused by product transport or storage.

Separate all packaging material to enable the recovery or disposal in accordance with current
standards in the country of use.

Before operating the component, ensure that the stated specifications and performance
correspond to requirements.

During component installation, ensure suitable voltage overload protection devices are
fitted.

During component installation, ensure that no hazards are generated due to mechanical
movements.
 Install the component in an area where the set-up and maintenance phases are easily
performed without generating hazards for the operator.

Close off any connections with suitable safety caps/covers.

The components must be fixed correctly using, where possible, the specific anchors and
ensuring that the fixture remains efficient even when the actuator is repeatedly used at a
high frequency and in the presence of strong vibrations.

In the case of strong vibrations envisage suitable devices/systems able to dampen the effect
on the component.
POWER
BUS OUT BUS IN
LEDS