PM 1000288 000 00
Device handbook SIRAX BT5100
23/32
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
O/P 2
*
O/P 2
*
O/P 2
*
O/P 2
O/P 2
*
New / Change End value of the Output 1
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the fi rst digit from 0 through to 1, the value will wrap
from 1 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the fi rst digit, in this case to
“0”.
Enter New / Change End value of the Output 2, fi rst digit entered, prompting for second digit. (*Denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0, if fi rst digit is set to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the second digit, in this case to
“9”.
Enter New / Change End value of the Output 2, second digit entered, prompting third digit. (*Denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change End value of the Output 2, third digit entered, prompting for fourth digit. (* denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the “New / Changed End value of the Output 2” and
set the fourth digit, in this case to “0”.
New/changed End value of the Output 2 confi rmed.
Pressing the “
Down” key will re-enter to the “New / Change End value of the Output 2”.
Pressing the “
Up” key will confi rm New End value of the Output 2 and advance to the Start value of
Output selection (section 7.1.6.2.2).
