PM 1000288 000 00
Device handbook SIRAX BT5100
18/32
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT
INPUT
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
*
Pressing the “
Down” key will enter the “Selection of Elbow function of Input edit” mode and scroll the
value between yes and no.
YES : Elbow function is enabled.
NO : Elbow function is disabled.
Pressing “
Up” key will accept the displayed condition and advance to the Elbow value of Input selection
(section 7.1.5.4) or Output parameter selection(section 7.1.6).
Elbow Function of Input confi rmation
Pressing “
Down” key will re-enter into Elbow function of Input Edit mode.
Pressing “
Up” key will confi rm the displayed condition and advance to the Elbow value of Input selection
(section 7.1.5.4) or Output parameter selection(section 7.1.6).
Pressing the “
Down” key will enter the “New/Change Elbow value of the Input edit” mode.
Pressing “
Up” key will confi rm the present value as Elbow value of the Input and advance to the Output
parameter selection (section 7.1.6).
New / Change Elbow value of the Input
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 7, the value will wrap
from 7 round to 0 depending on set value of End value of Input.
Pressing the “
Up” key will advance the operation to the next digit and set the fi rst digit, in this case to
“4”.
Enter New / Change Elbow value of the Input, second digit entered, prompting for third digit. (*Denotes that
digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End value of Input.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“1”.
7.1.5.3 Elbow Function selection
This screen allows the user to enable or disable Elbow function of input.
7.1.5.4 Elbow value of Input
This screen appears only when Elbow function is enabled.
This screen allows the user to set the Elbow value of the Input.
The Elbow value of Input can be set beetween 1.5% to 98.5% of Set End value of Input.
