PM 1000288 000 00
Device handbook SIRAX BT5100
16/32
7.1.5. Input parameter selection
7.1.5.1 End value of Input
This screen allows the user to set the End value of Input.
End value of Input can be set up to 150% of set PT secondary value.
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
O/P 2
INPUT x012
O/P 12 y012
A
A
INPUT
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
*
INPUT x012
O/P 12 y012
A
A
INPUT
*
Output 2 Type confi rmation
Pressing “
Down” key will re-enter into Output 2 type Edit mode.
Pressing the “
Up” key will set the type and advance to the Input Parameter selection(section 7.1.5).
Pressing the “
Down” key will enter the “New/Change End value of Input edit” mode.
Pressing “
Up” key will confi rm the present value as End value of Input and advance to the Start value of
Input selection (section 7.1.5.2).
New / Change End value of Input
(*Denotes that digit will be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the second digit, in this case to
“5”.
Enter New / Change End value of Input, second digit entered, prompting for third digit. (*Denotes that digit will
be fl ashing).
Pressing the “
Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change End value of Input, third digit entered, prompting for fourth digit. (*Denotes that digit will
be fl ashing).
Pressing the “
Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “
Up” key will advance the operation to the next digit and set the fourth digit, in this case to
“0”.
