background image

PM 1000288 000 00 

Device handbook SIRAX BT5100 

2/32

Legal information

Warning notices

In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. Depending 
on the degree of danger the following symbols are used:

Qualifi ed personnel

The product described in this document may be handled by personnel only, which is qualifi ed for the respective task. Qualifi ed personnel have 
the training and experience to identify risks and potential hazards when working with the product. Qualifi ed personnel are also able to understand 
and follow the given safety and warning notices.

Intended use

The product described in this document may be used only for the application specifi ed. The maximum electrical supply data and ambient con-
ditions specifi ed in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as 
well as professional assembly, installation, handling and maintenance are required.

Disclaimer of liability

The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot 
guarantee completeness and correctness. This is especially true for diff erent language versions of this document. This document is regularly 
reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage http://www.camillebauer.
com.

Feedback

If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to: 
[email protected]

If the warning notice is not followed death or severe personal injury 

will

 result.

If the warning notice is not followed damage to property or severe personal injury 

may

 result.

If the warning notice is not followed the device 

may

 be damaged or 

may

 not fulfi ll the expected 

functionality.

Summary of Contents for SIRAX CH-5610

































Reviews: