Cameron Opti-Rip 415A-M1, Manual, Page: 31 / 76

31
OPERATION
OPERA
TION
#415-R1
8-15-18 - JR
For moving blade saws, the table contains
the desired rip widths, but they don't have
to be in any particular order since they
don't represent the saw arbor configuration.
For these saws, the saw configuration is
adjusted in a separate window. Click the
"Saw Setup" button from within the "Edit
Setup" window to access the saw setup
window.
"From Orders"
If you are using the order management
feature of the Opti-Rip software, the
"From Orders" button will allow you to pull
your setup data from the orders that you
previously entered. Click the "From Orders"
button. This will open a "Materials" window
that lists the materials from all of the active
orders. Each material to be processed
will be listed, separated automatically by
thickness. Note that if you stock your lumber
in different grades, you must designate
the grade in the material name along with
the species. The "Materials" window also
indicates the square footage remaining to be
processed for each material. Note that this
total square footage is a totaled from all of
your active orders.
Click on the material you are ready to run
and then select the "Import" button. This
action will automatically populate the "Setup"
data from the collection of orders that
will be simultaneously run using this one
setup. From the "Reference" field, you can
determine which orders call for each of the
widths to be ripped. Do NOT modify the
data in the reference field. After importing
the data, you should optimize your saw arbor
and confirm that the Saw Kerf, Auto Deduct,