Cameron Opti-Rip 415A-M1, Manual

Page: 28 / 76

28
OPERATION
OPERA
TION
#415-R1
8-15-18 - JR
The Main Window
When the Opti-Rip is powered up, the
main screen should be displayed on the
computer, and the machine should be ready
to run. This screen displays a graphic
representation of the saw arbor configuration
and the current board being processed.
It displays the selected values, required
quantities and the cumulative quantities of
each respective rip width. It also displays
current board information, cumulative values
and yields, the values of the auto-deduct
and deduct features as well as the process
time of the job currently in process.
Edit Setups
By clicking on the "Setup" button or the "1"
key, the operator can edit one of the 500
setups available. Setups are numbered
from 1 to 500. The reference number of the
current setup is displayed in the title bar of
the setup screen. Before information can be
entered into the setup editing window, a saw
arbor must first be configured. To switch
from one setup to another, press the "Setup
List" button.
Configuring the Saw Arbor
One of the most important preparations that
must be done is to assemble the saws on
the saw sleeve in the order that will satisfy
the following:
1) Provide the proper rip widths.
2) Utilize the lumber to the maximum
efficiency.
3) Generate the various rip widths in the