Cameron LEFM 200, User Manual

Page: 13 / 46

LEFM 200 Modbus User Manual IB0147 Rev. 8
December 2010 Page 9 Section 2
Setup Variable Holding
Register Variable
Definition
Address* Notes
Fluid No. 3 - Specific
Gravity Slope Float 396 User slope for calibrating –
Specific Gravity Fluid No. 3
Fluid No. 4 - Specific
Gravity Offset Float 448 User offset for calibrating –
Specific Gravity Fluid No. 4
Fluid No. 4 - Specific
Gravity Slope Float 450 User slope for calibrating –
Specific Gravity Fluid No. 4
Fluid No. 5 - Specific
Gravity Offset Float 502 User offset for calibrating –
Specific Gravity Fluid No. 5
Fluid No. 5 - Specific
Gravity Slope Float 504 User slope for calibrating –
Specific Gravity Fluid No. 5
Fluid No. 6 - Specific
Gravity Offset Float 556 User offset for calibrating –
Specific Gravity Fluid No. 6
Fluid No. 6 - Specific
Gravity Slope Float 558 User slope for calibrating –
Specific Gravity Fluid No. 6
Fluid No. 7 - Specific
Gravity Offset Float 610 User offset for calibrating –
Specific Gravity Fluid No. 7
Fluid No. 7 - Specific
Gravity Slope Float 612 User slope for calibrating –
Specific Gravity Fluid No. 7
Fluid No. 8 - Specific
Gravity Offset Float 664 User offset for calibrating –
Specific Gravity Fluid No. 8
Fluid No. 8 - Specific
Gravity Slope Float 666 User slope for calibrating –
Specific Gravity Fluid No. 8
Fluid No. 9 - Specific
Gravity Offset Float 718 User offset for calibrating –
Specific Gravity Fluid No. 9
Fluid No. 9 - Specific
Gravity Slope Float 720 User slope for calibrating –
Specific Gravity Fluid No. 9
Fluid No. 10 - Specific
Gravity Offset Float 772 User offset for calibrating –
Specific Gravity Fluid No. 10
Fluid No. 10 - Specific
Gravity Slope Float 774 User slope for calibrating –
Specific Gravity Fluid No. 10
2.8 Password Entry
Entering the password into Holding Register 2000 enables the user to change any Holding
Register’s value and to save it (Burn and Use). Once an administrator password has been
entered, then the passwords for up to 5 users and the administrator himself can be changed. The
5 non-administrators can change only the analog scaling and the Kfactor (LEFM200C only).