Operation and function
21
«СТАРТ/СТОП» button:
This is used to start and stop and complete the selected baking program.
СТАРТ:
in order to a program start, press «СТАРТ/СТОП» button for about 1 second. A short beep
is heard and the two dots between hour and minute begin to flash and the program starts.
Complete the selected baking program.
СТОП:
in order to stop a program, press the «СТАРТ/СТОП» button for about 2 seconds until a beep
confirms that the program has been switched off.
On/off
Two dots are flashing: program is running.
Two dots are quiescent: program is over.
Delay (use the «ВРЕМЯ +» and the «ВРЕМЯ » button)
You can delay the time your breadmaker starts to have fresh bread ready when get up in the morn
ing or when you come from work.
We recommend that before you use the delay timer, you try out a few recipes.use recipes that have
produced good results for you in the past.
Use the «ВРЕМЯ +»button to advance the time in 10 minute increments,you will do this until the
timer reads you want setting ,if necessary,use the «ВРЕМЯ » botton to decrease the time .
EXAMPLE:
it is 8:30p.m., you would like your bread to be ready the next morning at 7 o’clock, i.e.
in 10 hours and 30 minutes. Press the «ВРЕМЯ +» until 10:30 appears , the bread should be ready
is 10 hours and 30 minutes.
If you work with the time delay option, do not use any easily perishable ingredients such as eggs,
fresh milk, etc.
Keep the bread warm:
Your bread is kept warm for 60 minutes after end baking. If you would like to take the bread out,
switch the program off with the «СТАРТ/СТОП» button.
Warning display:
If the display shows «H:HH» after you have pressed «СТАРТ», the temperature inside is still too
high. Press «СТОП», open the lid and let the machine cool down for 10 to 20 minutes.
If the display shows «E:EE» after you have pressed «СТАРТ», the temperature sensor is disconnec
tion, please check sensor carefully by authorized expert.
