Cameo AZOR S2, User Manual

Page: 16 / 147

16
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
SLAVE MODE
Starting from the main display, press MENU to enter the main menu. Use or to select the
menu item
Slave and confirm with ENTER. Connect the slave and master unit (same model, same
software version) using a DMX cable, and activate a stand alone mode on the master unit. The
slave unit will now follow the master unit. Alternatively, the control signal can be transmitted via
W-DMX (iDMX stick optionally available).
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
-------- Menu --------
Slave
SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to enter the main menu. Using and , select the
menu item
Settings and confirm with ENTER.
Wireless
Display
|
Service
------ Settings ------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
-------- Menu --------
This will take you to the submenu for setting the submenu items (see table, select with and ,
confirm with ENTER, change value or status with and , confirm with ENTER).
Settings (factory setting)
Wireless Wireless
settings
(iDMX
stick
optional)
iDMX
State Off Wireless control disabled
On
Wireless control enabled
Signal
routing To XLR Signal -> DMX OUT
Backup
by XLR Backup via DMX IN with W-DMX signal interruption
Receive
only W-DMX reception only