Cameo AZOR S2, User Manual

Page: 14 / 147

14
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
OPERATION
NOTES
When the spotlight is started, “Update Wait” briefly appears on the display, then “Welcome to
Cameo”, the model name and the software version. The motors are then reset (Motor Reset
Please Wait). After this process, the spotlight is operational and the previously activated operating
mode is launched.
MAIN DISPLAY IN DMX MODE
The main display in DMX mode shows the currently set DMX start address (see illustration). If the
spotlight has no DMX signal, the characters on the display flash.
DMX Address
001
SETTING DMX START ADDRESS (DMX Address)
Starting from the main display, press MENU to enter the main menu. Now use or to select the
menu item
DMX Address and confirm with ENTER. Now use the or buttons to configure the
desired DMX start address and press ENTER to confirm (highest value dependent upon activated
DMX mode).
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
-------- Menu --------
DMX Address
DMX Mode
Stand Alone
Slave
--- DMX Address ---
001
CONFIGURING DMX MODE (DMX Mode)
Starting from the main display, press MENU to enter the main menu. Now use or to select
the menu item
DMX Mode
and confirm with ENTER. Again use or to select the desired DMX
mode and confirm with ENTER. Tables with the channel assignment of the different DMX modes
can be found in these instructions under DMX CONTROL.
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
-------- Menu --------
21CH Basic
24CH Standard
28CH Extended
----- DMX Mode -----