19
DEVICE SETTINGS (Settings)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item “Settings” (dark
background) and confirm by pressing ENTER. You will then be taken to the sub-menu to set the following sub-menu items (select the sub-menu
items with +, -, set with ENTER, +, -, ENTER):
System Settings
DMX Address
001
Mode DMX 39CH
Settings
Network Setting
System Info
Settings
Display Rev
= Flip Display
ON
= Rotation of the display by 180° (overhead installation)
OFF
= no rotation of the display
Display
= Display lighting
ON
= permanently on
OFF
= deactivation after approx. 2 minutesa of inactivity
DMX Fail
= Operation status with DMX
signal interruption
Hold
= last command is held
Auto
= activates the AUTO mode
Blackout
= activates Blackout
DimmerCurve
= Dimmer Curve
Linear
= The light intensity increases linearly with the DMX value.
Exp
= Adjustment of the light intensity is finer in the lower DMX value range
and coarser in the upper DMX value range.
Log
= Adjustment of the light intensity is coarser in the lower DMX value
range and finer in the upper DMX value range.
S-Curve
= Adjustment of the light intensity is finer in the lower and upper DMX
value ranges and coarser in the middle DMX value range.
Pan Rev
= Pan Reverse
ON
= Reversal of the Pan direction
OFF
= no reversal of the Pan direction
Tilt Rev
= Tilt Reverse
ON
= Reversal of the Tilt direction
OFF
= no reversal of the Tilt direction
Pan Angle
= Pan Angle
630
= Pan angle 630°
540
= Pan angle 540°
Feedback
= position correction
ON
= activates automatic position correction
OFF
= deactivates automatic position correction
Mov Blackout
= Automatic blackout during
head movement
ON
= Blackout during head movement
OFF
= no blackout during head movement
Test
= Function test
ON
= step-by-step function test of LEDs and motors (Pan, Tilt,)
OFF
= stops the function test
Reset
=
Reset
Pan&Tilt
= Resetting of the Pan & Tilt motors
NETWORK SETTINGS (Network Setting)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item “Network Setting”
(dark background) and confirm by pressing ENTER. You will then be taken to the sub-menu to set the following sub-menu items (select the sub-
menu items with +, -, set with ENTER, +, -, ENTER):
System Settings
DMX Address
001
Mode DMX 39CH
Settings
Network Setting
System Info
