17
SETTING THE DMX START ADDRESS (DMX Address)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item “DMX Address”
(dark background) and confirm by pressing ENTER. The 3 digits which show the DMX start address, change their colour to red, and you can use the
+ and - buttons to select the desired DMX start address. Confirm the process with ENTER and press the MODE button to return to the main display.
System Settings
DMX Address
001
Mode DMX 39CH
Settings
Network Setting
System Info
SETTING THE OPERATING MODE (Mode)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item “Mode” (dark
background) and confirm by pressing ENTER. The digits which show the operating mode (for example DMX 39CH), change their colour to red, and
you can use the + and - buttons to select the desired operating mode. Confirm the process with ENTER and press the MODE button to return to the
main display.
Operating modes: DMX 9CH, 29CH, 19CH, 39CH, Slave, Auto, Static.
System Settings
DMX Address
001
Mode DMX 39CH
Settings
Network Setting
System Info
DMX MODE (DMX)
Four different DMX modes are available for selection: 9-channel, 19-channel, 29-channel and 39-channel (DMX 9CH, 19CH, 29CH, 39CH). The setting
is made as previously explained in section SETTING OPERATING MODE. You will find tables with the channels of the different DMX modes in this
manual under DMX CONTROL.
Mode DMX 39CH
SLAVE MODE (Slave)
The setting is made as previously explained in section SETTING OPERATING MODE. Connect the slave and the master unit (same model) with a DMX
cable. Enable one of the standalone modes (Auto, Static) in the master unit. Now the slave unit follows the master unit.
Mode Slave
AUTO MODE (Prog1 - Prog8)
The 8 various auto programs consist of a sequence of fixed programmed colour and motion changes.
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item “Mode” (dark back-
ground) and confirm by pressing ENTER. The digits which show the operating mode change their colour to red, and you can use the + and - buttons
to select the desired Auto operating mode. As soon as you confirm with ENTER, the currently selected Auto program is started. Press ENTER again,
then use the + and - buttons to select one of the 8 Auto programs (Prog1 - Prog8) and confirm with ENTER. Now use the arrow buttons to select the
“AutoSpeed” menu item to adjust the program speed as desired. Press ENTER to confirm, and adjust the speed from 000 to 255 by using the + and -
buttons. Confirm with ENTER and press the MODE button 3x to return to the main display.
