Page
36
- Manual
FA01798-EN
- 01/2023 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Show clock
Enable the clock on the display.
Timer management
Show clock
Set the clock
Set the date and time.
Timer management
Set the clock
Use the arrows and the Enter button to enter the desired values.
Automatic DST
Enable automatic daylight saving time setting.
Valid in Central Europe only UTC+1.
Timer management
Automatic DST
Deactivated (Default)
On
Summer changeover: +1 hour on the last Sunday in March (change to daylight saving time).
Winter changeover: -1 hour on the last Sunday in October (change to standard time).
Time format
Choose the clock display format.
Timer management
Time format
24-hour
12-hour
Create new timer
Time one or more types of activation chosen from those available.
Timer management
Create new timer
Use the arrows to choose the desired command.
Open
Partial opening
B1-B2 output
BUS 1 module relay - Activate output 2 (relay output) on BUS 1 I/O module
BUS 2 module relay - Activate output 2 (relay output) on BUS 2 I/O module
Press ENTER to confirm.
Start time
Use the arrows to set the function activation start time.
Press ENTER to confirm.
End time
Use the arrows to set the function activation end time.
Press ENTER to confirm.
Days of the week
Use the arrows to set the function activation days.
Select days
All week
Press ENTER to confirm.
Remove timer
Removes one of the saved timings.
Timer management
Remove timer
Use the arrows to choose the timing to be removed.
0 = [Opening]
P = [Partial opening]
B = [Output B1-B2]
R = [BUS module relay]
Press ENTER to confirm.
