CAMBIUM NETWORKS
026v003
149
Attribute
Meaning
SM Traffic Isolation
Disabled: This is the default mode. When SM isolation is disabled, an
SM is able to communicate with another SM, when both the SM’s are
associated to the same Access Point (AP).
Enabled: When SM Isolation feature is “Enabled”, SM#1 will not be able
to communicate with SM#2 (peer-to-peer traffic) when both the SM’s
are associated with the same Access Point (AP). This feature essentially
enables the AP to drop the packets to avoid peer-to-peer traffic scenario.
DHCP Option 82
Disabled: When ‘Disabled’, ePMP does not insert the "remote-id" (option
ID 0x2) and the "circuit-id" (ID 0x01)
.
DHCP Option 82 is ‘Disabled’ by
default.
Enabled: ePMP inserts “remote-id” (option ID 0×2) to be the SM’s MAC
address and the “circuit-id” (ID 0×01) to be the AP’s MAC address.
Those two fields are used to identify the remote device and connection
from which the DHCP request was received.
LLDP
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer
protocol (as specified in IEEE 802.1AB)l used by ePMP for advertising its
identity, capabilities, and neighbors on the Ethernet/wired interface.
Disabled: ePMP does not Receive or Transmit LLDP packets from/to its
neighbors.
Enabled: ePMP can Receive LLDP packets from its neighbors and Send
LLDP packets to its neighbors, depending on the LLDP Mode
configuration below.
Note
LLDP packets are Received/Transmitted ONLY to the neighbors on the
Ethernet Interface of the ePMP radio.
LLDP Mode
Receive and Transmit: ePMP sends and receives LLDP packets to/from
its neighbors on the Ethernet/LAN interface.
Receive Only: ePMP receives LLDP packets from its neighbors on the
Ethernet/LAN interface and discovers them.
Summary of Contents for ePMP
