![background image](http://html1.mh-extra.com/html/calimet/cm6/cm6_installation-and-owners-manual_3445000032.webp)
Accessory Wiring
Fire Access Box
Use 14-20 gauge awg wire (not included) and splice (join) with the white and black wires.
Common (White wire)
24V-COM
N/O (Black wire)
EXIT LOOP
Safety Edge / Edge Sensor
The Calimet CM9-934 Safety Edge is wireless and requires no wiring.
For other brand safety edges, typically, the MON-CLOSE or MON-OPEN input is used depending on if
you are monitoring the opening or closing cycle., but generally safety edges are used to monitor the
closing cycle as a third form of entrapment protection. Use COMMON and MON-24VDC if the safety
edge requires electricity.
Keypad
For the Calimet CM9-535 Wireless keypad, follow the separate keypad instruction manual for
installation details.
For wired and non-calimet brand keypads, use a 20 gauge stranded electrical wire and connect using
the following:
Normal Open/Relay
Relay
Common
24V-COM
12-24VDC
24-VDC
Access Controllers/Intercoms
Use a 20 gauge stranded electrical wire and connect using the following:
Normal Open/Relay
Relay
Common
24V-COM
12-24VDC
24-VDC
Alternatively, if the intercom/Access Controller requires a dedicated Normal Open/Normal Close
input, use the EXIT LOOP input on the bottom right of the circuit board for Normal Open, and the CL
input for Normal Close. The 24-VDC and the 24V-COM can supply electricity to the intercom/Access
Controller.
31