California Instruments 3000iL, User Manual

Page: 73 / 100

iL Series User Manual
California Instruments
Rev B 63
The following parameters may be calibrated:
•
AC output voltage
•
realtime output voltage (4801iL only)
•
output voltage readback
•
over voltage protection
•
AC output current
•
output current readback (4801iL only)
•
output impedance (4801iL only)
6.4.1 Front Panel Calibration Menu
The Entry keypad is used for calibration functions.
Shift Calibration Press this key to access the calibration menu list.
Display Measurement
CAL ON <value>
turns calibration mode on when the correct password
value is entered
CAL OFF
turns calibration mode off
CAL:LEV <char>
advance to next step in sequence (P1, P2, P3 or P4)
CAL:DATA <value>
input a calibration measurement
CAL:VOLT:AC
begin AC voltage calibration sequence
CAL:VOLT:PROT
begin voltage protection calibration
CAL:CURR:AC
begin AC current programming calibration sequence
CAL:CURR:MEAS
begin current measurement calibration sequence,
4801iL only
CAL:IMP
begin output impedance calibration sequence, 4801iL
only
CAL:VOLT:RTIME
begin real-time voltage programming calibration, 4801iL
only
CAL:SAVE
saves the calibration constants in non-volatile memory
CAL:PASS <value>
set new calibration password
6.4.2 Front Panel Calibration
WARNING: LETHAL VOLTAGES. AC sources can supply 425 V
peak at their output. DEATH on contact may result if the output
terminals or circuits connected to the output are touched when power
is applied.